Broadcast Consoles Cart Machines Meters Processors Digital Audio Info Understanding dB Manufacturers Prosound Index JimPrice.Com

 

            

ITC ESL-V Splice Finder  

ITC Erase/Splice Locator (ESL-V)

Specifications

Erase Depth (ITC Cart II Cartridge)
-55 dB (Bandlimited - 20 Hz - 20 kHz)

Typical Residual Coherent Noise
75 dB below 1 kHz, ref. 250 nWb/m

Cycle time
Standard Configuration - 30 seconds erase plus 1/4 total tape time for splice location
Set up for DRS Cart II - 22 seconds erase plus 1/4 total tape time for splice location

Cartridge Type
NAB A/AA

Tape Speed
30 IPS (76.2 cm/s) splice locate
1.875 IPS (4.76 cm/s) erase

Splice Detect Sensitivity
Greater than 1/2 mil.

Power Requirements
105 - 132 VAC, 60 Hz
210 - 264 VAC, 50 Hz

Consumption
11 VA minimum 650 VA maximum @ 120 VAC

Ambient Environment
+39 to +122F
+4 to +50C

Mounting
Tabletop or 19-inch rack

Dimensions
5.25 H 5.75 W 12 D inches, 13.34 H 14.6 W 30.5 D cm. Add 3/8-inch (1 cm) for feet

Weight
13.5 lbs. (6.12 kg)


Click here to go back to the cart machine page.

This page and its contents, copyright  1996-2007, JimPrice.Com. All company and product names are trademarks of the trademark holder.  Here's a link to the JimPrice.Com privacy statement.  If you have any questions about this page, please don't hesitate to e-mail me. (The address should be obvious to all but spam-bots.)

This page last updated 7/31/2007